|
(1)
This page will show you step by step on how to use our company's fibre faceplate. Picture on the left shows the original product you will buy from our stores. |
|
(2)
Open the cover. You may find the fibre adapter at right bottom. Fix the faceplate on the wall with the screws provided. |
|
(3)
Remove the cap from adapter. |
|
(4)
Connect the extended patch cord to the adapter. Buy the patch cord from our stores if you do not have. |
|
(5)
Connect the other patch cord (faceplate to ONT) to the other end of adapter. |
|
(6)
Put back the faceplate cover. |
|
(7)
If you are intending to conceal the patch cord inside the wall, you may also do it by removing the blocks at the center. |
|
(8)
Insert the block at the left hand corner (or at the right hand corner if your adapter is at the left) to fill the gap. Pull the patch cord into the faceplate from centre of the back. Put back the faceplate cover and that is it! |
Caution!
Do not let the connection point facing upward so to prevent dust.
